SAFETY PRODUCTS

Barricades

Name Description  

Type I Barricades

One reflective top panel. Meets the criteria for use on low speed, conventional roads or urban streets. Type I barricades are also used for pedestrian traffic control.

Type II Barricades

Top & bottom reflective panels. Type II barricades meet the criteria for use on expressways and freeways or other high speed roadways. Though similar to the Type I barricade, the Type II barricade offers more nighttime visibility because the bottom panel is also reflective.

Type III Barricades

Three reflective panels. They are primarily used where it is necessary to close a road completely. When used to close roadways, Type III barricades must also support the appropriate signage. These signs would include, but are not limited to: ROAD CLOSED, DETOUR, LOCAL TRAFFIC ONLY. When deemed necessary Type III barricades can be outfitted with Type A "warning" flashers.

Barricade Rails

TrafFix A-Cade Barricade
Flexible and durable polyethylene TrafFix Rails feature an I-beam design that protects the reflective sheeting from damage and allows nesting for easy storage and transport.

Plastic Folding Barricades

Plastic Folding Type I Barricade
Tough, lightweight, easy-to-handle and 100% recyclable, the TrafFix Type I barricade is made from durable, impact-resistant polyethylene, and is certified to meet NCHRP-350 and MUTCD standards. The plastic design eliminates metal legs that can pinch fingers and damage vehicles. Panels are recessed to protect the reflective sheeting, and the legs are equipped with anti-skid gripper teeth. The panels have reinforcement ribs to resist bending and warping.

Candlesticks - Grabber & Looper Tubes

With the convenient Grabber Tube handle, you can easily and quickly tie or wrap caution tape from one tube to the next. The innovative handle design enables you to easily move, set, drag or lift the Grabber Tube.

Traffic Cones

Orange & Lime Green
18", 24" & 36"
With (or) Without Reflective Collars

Grabber-Cones

TrafFix™ Grabber Cones - Molded Handle & Stackable Design

  • Convenient, molded handle for easy movement
  • Patented design prevents cones from sticking together
  • Flexible cone works with removable 16 lb. rubber bases
  • Cones and base will not crush even when run over
  • Bases and cones sold together and separately
  • Includes light mounting hole and keyhole sign slot
  • Stackable design for easy storage and transport
  • Certified to meet NCHRP-350 and MUTCD standards.

Channelizing Traffic Drums

The TrafFix Generation IV Channelizer Drum is manufactured from tough, reshapeable plastic. Available in either low density (soft) or high density (hard) polyethylene, the TrafFix Drum is made to bounce back after repeated impacts.

 

  • Drum is a minimum of 18" wide throughout its 36" height, regardless of orientation
  • Built-in carrying and dragging handle
  • Tapered design allows stacking with or without barricade lights for easy handling and storage
  • Two mounting holes for optional barricade lights

Safety Fence

Warning barrier fence is an extremely versatile and economical plastic construction site safety fence. Lightweight, flexible warning barrier fence is easy to handle as well as install. This fence is highly visible and is ideal for all construction applications as well as Haz Mat, crowd control, and many other uses.

Flashing Barricade Lights

Add an economy flashing light to any barricade for additional visibility, especially at night.

Warning Lights – Magnetic Mount

LED 625 Series High Power Warning Lights - Amber Magnetic Mount

LED625M-A is a high impact LED Warning light with a complete 360* Display. Flash pattern can be changed with button on base of light. There are four (4) user-selectable patterns. Magnetic Mount. Includes 75lb pull magnet with 15' straight cord and cigarette lighter plug w/dual rocker switch - ON/OFF and Pattern Change.

Warning Lights – Flange Base

LED 625 Series High Power Warning Lights - Amber

LED625F-A is a high impact LED Warning light with a complete 360* Display. Flash pattern can be changed with button on base of light. There are four (4) user-selectable patterns. Flange Base.

Delinators

Name Description  

Carsonite Roadmarker™

Excellent for straight-aways and general delineation. The "three-rail" design withstands high-speed vehicle impacts. They have met or surpassed the certification standards of a long list of local, state, and national agencies.

Guardrail & Barrier Delineators

Guardrail Delineators are mounted directly onto guardrails and barriers structures, providing consistent delineation. Posts come with installation hardware, wood/steel options, and reflective length/color options.

   

Safe-Hit Surface Mount Delineators

Durable & Flexible for Multi-Purpose Use. Safe-Hit Surface-mount and Soil markers are made to withstand the abuse of time, traffic and the elements. Safe-Hit's flexible posts are constructed of durable linear low density, co-extruded polyethylene with ultraviolet inhibitors. They are available with portable bases, surface mount bases or soil anchors. Safe-Hit posts feature a two piece, self-locking system that reduces installation and maintenance costs. The Safe-Hit Line is ideal for applications with average impact frequency.

Safe-Hit Guide Post (Round post, flattened on top w/ black oval cap, 3" x 9" reflective strip & surface mount pin lock base)

Safe-Hit Channelizer(Round post with recessed cap, one 6" reflective wrap and surface mount pin lock base)

Safe Hit Surface Mount Starter Kit

Also available which includes 10 Safe-Hit posts, 10 SMA or SMT bases and 10 Epoxy kits or Butyl pads.

Surface Mount & Twist Lock Base Assemblies

For installation of channelizers on asphalt or concrete, include:

  1. SMA Standard surface mount base with locking pins for use where posts are permanently installed.
  2. SLT Sub-level twist lock base where it is desirable to have the base level with the concrete or asphalt surface. Highly recommended where foot traffic is present.
  3. SST Sub-surface twist lock base where a low profile is desired due to vehicular or foot traffic.
  4. SMT Twist lock base, for use where delineators or sign posts must be installed, removed and reinstalled periodically.
  5. PSB Portable Base for temporary use of posts and signs.

*A plastic insert (removable plug) is also available for all bases to protect against dirt accumulation and to protect foot traffic when post is removed.

Safety Apparel and Accessories

Name Description  

Safety Vests & Apparel Can Be Customized with Your Company Name &/or Logo – Contact Us for Details

Hi-Visibility ANSI Certified Safety Vests

ANSI CERTIFIED CLASS II – Safety Vest Lime & Orange Sizes : M - 5XL
100% Polyester Mesh Front & Back. Non-conductive nylon zipper front closure. 4 Outside pockets, 2 Inside pockets. 2" Silver Reflective Material.

 
 

Hi-Visibility ANSI Certified Safety Vests

ANSI / ISEA 207-2006 CERTIFIED CLASS II - Public Works Safety Vest
Lime
Available in 3 Sizes, (M - L), (XL-2X), (3X-4X).
100% Polyester Solid Front & Back
5-point hook & loop breakaway design. Large adjustable side straps for easy fit. Two tone contrasting polyester material with 2" reflective material * Shorter body cut to accommodate tools and equipment.

 

Hi-Visibility ANSI Certified Safety Vests

ANSI CERTIFIED CLASS III Lime & Orange Sizes : M - 5XL
100% Polyester Mesh Front & Back. Non-conductive nylon zipper front closure. 4 Outside pockets, 2 Inside pockets
4 1/2" contrasting polyester material with 2" reflective material.

 

Hi-Visibility ANSI Certified Parkas

ANSI CERTIFIED CLASS III - Heavy Weight Parkas
Lime
Sizes: M-6X
Waterproof Parka jacket, with fleece lining, detachable hood, elastic wrist with snap closure allow for snug fit. 1 radio pocket, 1 inner pocket, 2 zipper pockets
Zip-Off sleeves make CLASS II Vest

Hi-Visibility ANSI Certified Bomber Jackets

ANSI CERTIFIED CLASS III - 3 Season Bomber Jacket
Lime & Orange
Sizes: M-6X
Waterproof with Removable Fleece Lining.
Zip-Up front with two pockets and hooded Class 3. Made with 2" wide reflective stripping. Easy to wash.

 

Hi-Visibility ANSI Certified Windbreaker Jacket

ANSI CERTIFIED CLASS III - Windbreaker Jacket
Lime
Sizes: M-6XL
Lined windbreaker with snap button
2 Outside Pockets
2" wide Reflective Stripping

Hi-Visibility ANSI Certified Sweatshirt

ANSI CERTIFIED CLASS III - Sweatshirt
Lime & Orange
Sizes: M-4X
Zip-Up front with two pockets and hooded Class 3.
Made with 2" wide reflective stripping.
Easy to wash.

Hi-Visibility ANSI Certified T-Shirts

ANSI CERTIFIED T-SHIRTS Lime & Orange Sizes : M - 4XL
ANSI specification fabric enhances daytime visibility.
Class 2 safety garment when worn in combination with reflective suspenders. Comfortable, durable and machine washable.

Hi-Visibility ANSI Certified Class II T-Shirts

ANSI CERTIFIED Class II T-SHIRTS Lime & Orange Sizes : M - 4XL
Quick dry breathable polyester fabric.
Left chest pocket.
2" wide silver reflective stripes horizontal front and back.
360° reflectivity provides full body outline.

Hi-Visibility ANSI Certified Class III T-Shirts

ANSI CERTIFIED Class III - T-SHIRTS Lime Sizes : M - 4XL
Quick dry breathable polyester fabric. Left chest pocket.
2" wide silver reflective stripes on front, back and around each sleeve. 360° reflectivity provides full body outline.

Hi-Visibility ANSI Certified Class II Long Sleeve T-Shirts

ANSI CERTIFIED CLASS II - Long Sleeve T-SHIRTS Lime Sizes : M - 4XL
Quick dry breathable polyester fabric. Left chest pocket.
2" wide silver reflective stripes horizontal front and back.
360° reflectivity provides full body outline.

Hi-Visibility ANSI Certified Class E Pants

ANSI CERTIFIED PANTS Lime & Orange Sizes: M-4X ANSI Breathable Safety Pants Class E - 100% Solid Polyester - two 360° bands of 2" reflective tape on each leg.

 

Hard Hats


Dust Masks

     

Safety Glasses

Ear Plugs

Spill Response Kits

Ratchet Straps

Safety Fence

Safety fencing is an economical way to control foot & vehicular traffic on or off the construction site. Most commonly found in safety orange, other colors are also available upon special request.

Quality Work Gloves

  • Lined Leather Palms
  • Lined Leather Drivers
  • KincoPro™
  • Green High Visibility
  • Orange High Visibility
  • Unlined Leather Drivers
  • Unlined Leather Palms
  • Knitted, Chore, Jersey, & Canvas
  • Coated (lined & unlined)


Signs, Posts & Hardware

Regulatory Signs

   

Warning Signs

  

School Signs

Safety Mesh Signs

We stock several types of standard signs and we can also provide custom signs in many sizes and configurations. Contact our knowledgeable sales staff for assistance with your specific sign needs.

Sign Stands & Accessories

Hardware and Posts

  • Galvanized, U-Channel & Utility Posts
  • Round/Pipe Posts & Square Posts
  • Wood Posts & Utility Posts
  • Impact Recovery
  • Rain Caps
  • Brackets
  • Mounting Hardware (i.e., bolts, nuts, washers)
  • Banding Mailbox Supports & Post Drivers

Impact Recovery Posts & Bases

Impact Recovery Posts are flexible sign posts that can help you avoid repair and replacement costs. Flexible sign posts feature springs inside the post that allow them to automatically spring back when hit. Your sign always stays upright and visible, plus you won't spend time and labor reinstalling sign posts that have been knocked down. Ideal for use as traffic sign posts and parking sign posts.

Car Stops & Speed Bumps

(Concrete & Recycled Rubber)

Name Description  

GNR Park-It Parking Curb

Rubber Park-It car stops are used in parking facilities to effectively stop cars pulling into parking spots, helping protect vehicles and the surrounding infrastructure. Unlike asphalt or concrete parking curbs, which need frequent replacements, Park-It rubber wheel stops are more forgiving of vehicles, sturdier and do not break or need to be replaced. Available in white or yellow. 3', 4' or 6' (L) x 6" (W) x 4" (H) - 34 lbs.

Concrete
Pre-Cast Parking Bumpers

Concrete wheel stops are designed to prevent vehicles from damaging buildings, sidewalks, and delicate landscape. Graduated taper on ends relieves danger of cutting tires. Mark parking spaces long after painted lines have worn off.

6 ft Standard Size (6"h x 9"w x 72"l) • Reinforce with (2) rebar pins.

GNR Easy Rider Speed Bump

Rubber speed bumps reduce vehicle speeds making parking lots safer. Constructed from 100% recycled tires, they are preformed for immediate installation. Flexible design conforms to the contour of virtually any road surface.

GNR Alley Bump

Alley bumps were developed specifically to address speeding and cut-through traffic in city alleyways. They slow cars to a stop. Constructed from 100% recycled tires, GNR alley bumps are preformed to ensure a smooth, safe ride. The Alley Bump's flexible design conforms to the contour of virtually any road surface. The bumps are simple to install and can be easily removed for storage or relocation. They are pre-drilled for anchoring spikes or lag bolts. They will not warp, crack, chip, or rot. They have molded highly reflective tape, cat's eye reflectors and a channeled bottom to facilitate drainage as well as to cover cabling or piping.

GNR Safety Rider Mini Hump

A unique modular device designed to slow traffic while maintaining a continuous traffic flow. The tongue & groove system allows the module units to be linked together to cover the width of any roadway.

  • 100% recycled rubber w/ in-molded, reflective highway tape (yellow or white).
  • Pre-drilled holes for quick installation; shipped with lag bolts and plastic shields - for installation on asphalt surfaces (Note: if installing on concrete, requires metal lag bolts and shields).
  • Can be easily removed for storage / relocation & can be used for temporary or permanent installation.
  • Lightweight - can be easily installed by 2 people.

GNR 3', 4' & 6' Park-It Car Stop – Recycled Rubber

GNR Home Park-It Car Stop – Recycled Rubber

GNR 4' & 6' Easy Rider Speed Bump – Recycled Rubber

GNR Speed Bump End Cap – Recycled Rubber

GNR Safety Rider Mini Hump – Recycled Rubber

GNR 4'& 6' Alley Bump – Recycled Rubber

GNR Alley Bump End Cap – Recycled Rubber

Concrete 6' Car Stop/Bumper (2 rebar spikes needed)

14" Rebar Spike for GNR Park-It (req. 4 per car stop) for Asphalt Install

6" Lag Bolts & Lead Shields for GNR Park-It (req. 4 per car stop ) for Concrete Install

Safety Accessories

Caution Tape

Yellow (or) Red
(3"x1000' roll)

Cones, Traffic & Highway

Orange & Green
18", 24" & 36"

28" & 36" w/ Reflective Bands

Flagging Tape

1-3/16" x 300' rolls. Available in all colors.