Pavement Maintenance Products

Crafco Hot Applied Crack Sealant

Product Name Melter Type
Crafco 201 Roadsaver Sealant oil jacketed
Crafco 211 Roadsaver Sealant oil jacketed
Crafco 221 Roadsaver Sealant oil jacketed
Crafco 533 Superflex HT direct fire
Crafco 546 Roadsaver Low Tack Type I direct fire

These are just a sampling of crack sealant products available from Crafco, Inc. Crafco offers up to 100 sealant types for a wide range of applications in all climatic conditions and temperatures.

To make selection easy for your particular application use, click on "SEALANT SELECTION GUIDE" on Crafco's website or use the handy "SEALER USAGE CALCULATOR"

Crafco Custom Specification Blends

Need something special to your region? Crafco can make it!

Product Description
Crafco PolyPatch

Specifically designed for cracks too large for crack sealing and distressed surfaces that are too small for re-paving. It is a versatile hot-applied, pourable, self-adhesive polymer modified asphalt binder containing selected aggregate to ensure good load bearing and skid resistant characteristics. Crafco recommends the Patcher II to heat & prepare material PolyPatch for application.

Crafco Mastic One

Crafco Mastic One is designed for large cracks and distressed surface areas too small for re-paving. Ideally used to fill distresses. It is a versatile hot-applied, pourable, self-adhesive ridged asphalt binder containing selected aggregate to ensure good load bearing and skid resistant characteristics. Mastic One is compounded with standard weight aggregate.

Crafco Loop Detector Sealant

34271 - Crafco Loop Detector Sealant is a single component, hot melt, rubberized asphalt material formulated to be a stiff, yet flexible, sealant which is ideally suited for sealing traffic loop detector cuts. Crafco Loop Detector Sealant is a thin, free flowing fluid which pours easily and penetrates narrow traffic loop detector cuts. This sealant is self leveling. Application use includes both asphalt and Portland Cement Concrete pavement. When cool, Loop Detector Sealant is a well bonded, stiff product that resists tracking or pick-up in pedestrian and slow moving traffic areas. Can be applied using pressure feed or pour pots.

Marker Adhesive

CRAFCO Hot-Applied Bituminous Marker Adhesive is a hot-applied bituminous material which, when properly used and applied, bonds markers and reflectors to both asphalt and concrete pavement surfaces.

Crafco Hot-Applied Flexible Pavement Marker Adhesive is a hot-applied thermoplastic bituminous material which, when properly used and applied, bonds markers and reflectors to both asphalt and concrete pavement surfaces. Hot-Applied Flexible Pavement Marker Adhesive is supplied as an easy to use single component material which is easily melted and poured or pumped onto pavement surfaces.

Cold Applied Crack Fillers

Product Description
Lastek 33 Rubberized Liquid Crack Sealer

Elastic ready to use sealer - just pour it in. Dries fast. Provides years of protection. LASTEK 33 is a one (1) component, pourable, high performance, black, rubberized asphalt emulsion-based crack sealer. It is ideal for filling cracks up to ½" wide in any asphalt or concrete surface. LASTEK 33 dries to a black rubber-hard consistency, providing a crack-free, water resistant surface prior to application of pavement sealer.

Crack Sticks

Permanent crack sealant that is applied with heat (a simple hand held torch). Bonds to the sides of the crack and expands and contracts with freeze/thaw cycles. Available in 3/8", 1/2" & 3/4" sizes.


Ready-to-use blend of asphalt emulsion, mineral fillers, glass fiber, ground rubber and plasticizer. It is very durable for parking lots, driveways, play grounds, walkways, running tracks, tennis courts, etc. In addition to alligator cracked areas, it can also be used to fill shallow depressions or to fill cracks in excess of 1/2" wide in asphalt surfaces.

Crafco Qwikseal

Crafco's Qwikseal is a peel and stick modified asphalt compound ideal for sealing cracks, seams around pavement patches and concrete joints. Qwikseal is easy to apply and when properly installed it prevents water intrusion and the deterioration it causes to the pavement. Available in a preformed continuous strip either 4" or 2 ½" wide and 50 feet in length.

Backer / Hot Rod

Product Description
Backer Rod
(Hot Rod)

Asphalt crack backer rod (also known as "hot rod") is designed for the purpose of pre-filling cracks in asphalt that are deeper than 1/2" in depth. Backer rod is a continuous-length, compressible foam material that stops the waste of costly sealant material.

Sof-Rod / Backer Rod Backing Foam Closed Cell

Backing foam Backer Rod is round, flexible, continuous lengths of cross-linked, closed-cell polyethylene foam for use as a backing material for hot and cold applied sealants. It limits the depth of the sealant and prevents excessive sealant use. It also helps sealant to assume optimum shape factor to prolong sealant service life and acts as a barrier to the flow of sealant through the joint. It is easy to apply, chemically inert, virtually dust free, waterproof and does not bind the water in the wall joints so the adhesion disruption does not occur.

Cold Patch

Product Description
Cold Patch Permanent Pavement Repair Material

Permanent pavement repair material is the high-performance asphalt patching material that is easily applied any time of the year, under any weather conditions. Just sweep the area to be repaired, removing loose debris. Shovel or pour cold patch material into the hole. Compact the patch and it's ready for traffic.

FloMix Polymer Based Asphalt Rapid Repair System

FloMix Asphalt Repair has been used effectively for repairing potholes, alligatoring and cracks on highways, parking lots, city streets, garage floors, roads, driveways and sidewalks. FloMix is a cold-applied, liquid and aggregate slurry that hardens in minutes to provide a long-lasting repair. It can be finished precisely to grade, resulting in a smoother ride over the repaired areas. FloMix is easily feathered into the surrounding asphalt to form a repair that visually blends in with the existing pavement.


Product Description
Crafco Detack

Open freshly crack- sealed pavements to vehicle and pedestrian traffic immediately and eliminate sealant pick-up and tracking with Detack. This product is an economical, biodegradable liquid from Crafco that eliminates sealant tack when sprayed onto freshly applied hot pour sealant. Now you don't have to wait until the sealant has cooled before opening the pavement to traffic. Eliminates tracking, blotting & sticking Remains active for 1 hour Applies over hot sealant

Sealer Additives

Product Description
FSA Fast Sealing Additive

Product Improver for Pavement Sealer

  • Cuts Drying Time in Half
  • Improves Bonding
  • Stops Tracking

When your job demands superior product performance, reduced labor costs, plus faster drying and curing times, FSA is the answer. This unique, silicone fortified, latex additive for any pavement sealer material is less expensive than other additives. Stops tracking, sand roll-out and filter/tip clogging. Contains NO Acrylonitrile Butadiene. FSA is not an extender or bulking agent.

FSA AE Fast Sealing Additive

Product Improver for Asphalt Emulsion Based Sealer For those applicators that are now using the Asphalt Based Sealer, we have formulated FSA-AE Additive to work with all brands of Asphalt Based Sealer. Reduce curing times by at least 50% or more, help reduce sand roll-out, reduce power steering marking and tracking problems, improve bonding, and more.

Pro-Line Dura Grip Slip Resistant Additive

Dura Grip is a micronized polymer used as a slip-resistant additive to concrete sealers. This product is made from Acrylic to blend easily and is non-abrasive. Comes in 3.2 oz for one gallon of sealer 16 oz for 5 gallons of sealer.


Product Description
Oxi-Bond Latex Primer Concentrate

To improve bonding of coal tar sealers. A highly efficient easy-to-use primer for exposed aggregate or polished asphalt, old porous or oxidized surfaces, oil spots, or fresh hot mix patches. OXI-BOND PRIMER improves the performance and longevity of all coal tar sealers applied over it. Make OXI-BOND PRIMER an itemized part of your bids and proposals to enhance your image, improve your jobs and increase your profit.

High Friction Surface (HFS)

Product Description
Crafco HFS Multi-Purpose Epoxy Stone Surface Treatment

Crafco HFS (High Friction Surface) is an extremely durable, low maintenance multipurpose epoxy stone surface treatment that is designed for asphalt and concrete application, as well as wood and metal surfaces. Fuel, oil and de-icer resistant, the HFS system provides long lasting braking distance reduction as well as visual guidance to drivers, cyclists and pedestrians. HFS is available in a variety of standard colors as well as custom colors to fit your project's needs.

Waterproofing Membrane / Geo Composite

Product Description
Crafco Geotac & Propex Petrotac® Waterproofing Membrane

Excellent for waterproofing joints and cracks. The waterproofing membrane is comprised of a rubberized asphalt waterproofing element and a non-woven pavement reinforcing grade polypropylene fabric laminated to the outer surface. Peel-and-stick waterproofing membranes designed specifically to be used as a moisture barrier. They prevent water permeation or penetration through pavement surfaces and subsequent damage that moisture causes. Propex Petrotac also available in 12", 18", 24", 36" & 48" widths.

Crafco Hot Applied Crack Sealant

Product Description
Hand Held PourPot

Comes with legs to eliminate back strain.

2.6 Gallon Pour Pot with Wheels

Offset handle plunger lever and enclosed 2 ½" round squeegee eliminates the need for additional crack squeegee to be used afterward. Wheels reduce the strain of carrying the weight of the pour pot when filled. Popular with contractors who prefer to pour by hand.

Crafco Hand Held Pour Pot


  • for application of thin crack sealant to a joint or crack
  • gravity feed with shut off lever

Sealing Tips & Material Handling Tools

Product Description
Crafco Super Shot Drip Stopper

Use with Crafco Super Shot sealing tip. Stops sealant drip once wand trigger is released.
27114 – Tip Adapter
50270 – Duckbill Valve
27115 – Shroud - Tip Adapter

Crafco Swivel Applicator

Plate tip with movable juncture. Used for over banding.
27120 – 3" Swivel Applicator (application disc diameter - 76mm)
27130 – 4" Swivel Applicator (application disc diameter - 100mm)

Crafco Duckbill

50270 - Rubber tip, use with Super Shot Melter wands to prevent dripping of material. It is a standard fitting of the heated application hose.

Crafco Sealing Foot / Flush

Used for random asphalt and concrete joints.
27154 – Sealing tip/ft assembly ¼" flush (hole width 6mm)
27155 – Sealing tip/ft assembly 3/8" flush (hole width 9mm

Crafco Sealing Foot / Protruded

Use for straight asphalt and concrete joints.
27159 – Sealing tip/ft assembly ¼" protruding (hole width 6mm)
27160 – Sealing tip/ft assembly 3/8" protruding (hole width 9mm)

Crafco Joint Sealing Tip

Use for straight asphalt and concrete joints.
27146 – Sealing tip assembly ¼" (hole width 6mm)
27147 – Sealing tip assembly 3/8" (hole width 9mm)

Crafco Round Sealing Tip

Multi-purpose for random cracks and joints. Use with a squeegee for most applications.
27170 – Sealing tip assembly 3/8" (tube diameter 9mm)
27171 – Sealing tip assembly 1/2" (tube diameter 13mm)

Crafco Application Disk

Used for over banding, great labor saver.
27162 – 3" disk assembly (disc diameter 76mm)
27163 – 4" disk assembly (disc diameter 100mm)
27164 – 6" disk assembly (disc diameter 152mm))

Crafco Ironing Wand w/4ft. 6in. Handle

32243 – Used as a leveling and a warming tool for the proper application of TechCrete.

Crafco Shoebox

Used for assisting placement of patching materials. Use the size suitable for your application. Fill using the Material Handler or TechCrete Bucket. 32350 - 203x203x76mm (8"x 8"x3") 32351 - 203x254x76mm (8"x10"x3") 32352 - 203x305x76mm (8"x12"x3") 32353 - 203x355x76mm (8"x14"x3")

Crafco TechCrete Bucket

32263 - For transporting the patching materials from Patcher I or Patcher II to the repair area.

Crafco Material Handler

56375 - For handling and distributing of the material from the melters to the repair area. Propane heated with material side discharge gate.

Direct-Fire Melters/Applicators

Product Description
10 gal Tank with Hand Agitator & Wheels


  • 200,000 BTU Torch w/ hose, regulator and striker
  • Spring tensioned release valve w/ steel screed
  • Product well thermometer

10 gal Tank with Hand Agitator Only


  • 200,000 BTU torch w/ hose, regulator and striker
  • Product well thermometer
  • Hand agitator, temperature gauge, propane burner, hose and regulator, bottle holder, hinged lid, lifting handles and draw-off valve.
  • Dimensions: 40"Lx29"Wx33"H

30 Gallon Melter / Agitator

Skid Mount/Direct-Fire This unit can provide hot material in 30 minutes or less and is equipped with a draw-off valve, hand agitator, temperature gauge, hinged lid, lifting handles, propane burner, hose and regulator. 50" x 37" x 25", approx 135 lbs

Crafco Supershot Melters / Applicators Oil-Jacketed

Ultimate in efficiency and ease of use. Digital controls accurately regulate the heating temperature of the sealant and transfer oil. A patented internal pumping system eliminates clean out and features a hydraulic flow rate adjustment. There are no valves, no hose pressure build up, fewer moving parts. Super Shot melters will out-perform any comparable sized machine available.

Crafco Supershot Melters / Applicators Oil-Jacketed

Ultimate in efficiency and ease of use. Digital controls accurately regulate the heating temperature of the sealant and transfer oil. A patented internal pumping system eliminates clean out and features a hydraulic flow rate adjustment. There are no valves, no hose pressure build up, fewer moving parts. Super Shot melters will out-perform any comparable sized machine available.

Crafco DF 10-Gallon Mini-Melter

Eliminate the delay and uncertainty experienced with cold pour type crack fillers. Seal cracks with proven hot applied sealants and seal coat minutes later!

Crafco Mini Melter/Applicator 10 Gallon

One man operation, hand-agitated 10 gallon melter/applicator that can melt sealant for application in approximately 20 minutes. Capable of melting and applying up to 800 lbs of material per day. The wheeled melter follows random cracks for efficient crack sealing.

Crafco Mini Melter 30 Gallon Air-Jacketed

A 30 gallon sealant melter and dispenser. Comes equipped with hand agitator, temperature gauge, regulator, hose, burner, lifting handles, hinged lid and draw-off valve. The kettle is capable of melting up to 1200 lbs of sealant per day. Air jacketed, propane fired.

Crafco Patcher I & II

Crafco's new multi-use melter to be used for either Polypatch (asphalt) or Techcrete (concrete) patching hot pour material. The Crafco Patcher Series Melter is available in two sizes. The Patcher II's large volume easily handles large production projects. The Patcher I is designed for smaller patching tasks. Melter has a gravity feed chute to apply the hot pour patching products. The Patcher II has two large openings for easy material loading. Advanced digital temperature controls maintain accurate material and oil temperatures and feature an auto flame shut down for safety. The products are thoroughly mixed by a horizontally mounted internal shaft with sweep paddles.

Crafco BAX 250 Applicator

The BAX 250 will heat 250 pounds of adhesive per hour and applies 20 "shots" per minute for high application rates. The BAX comes skid mounted. Also available is a 600 pound unit for Flexible Marker Adhesive application. A 10 foot heated hose and 24" wand allows maneuverability and efficient production. Additional hose and wand options are available. *Optional all electric, BAX100ES model also available.

Sealcoating Equipment

Product Description
Crafco Super Sealcoater

550 & 800 Gallon Standard features are considered options on all other competitive seal coat machines. Quality parts and superior construction make the Super Sealcoater the machine of choice for everyday rigorous use. Features such as the unbreakable steel tank to the oversize hydraulic system set this unit apart from all the others. Built with Crafco quality and engineered to last, choose the Super Sealcoater for your next sealcoat machine.

Crafco Emulsion Storage Tanks

Conveniently store emulsions on site for immediate use at truck load prices. They are available in 2, 3, 4, 5, 6, 8 &10 thousand gallon sizes.

Tack Coat & Tack Trailers
Tanks-On-Skids & Drums

Product Description
Marathon Cold Tack Sprayer

Model PES200 This non-heated unit is designed for use with emulsified asphalts and some cold-pour crack fillers.

  • 200 gallon capacity, 5.5hp Honda engine, 10 gpm pumping system.
  • Standard 40 ft. high pressure material hose w/1/4 turn control valve - 5 ft. spray wand.
  • Fast material filling through a 4" diameter opening.

Marathon Non-Insulated Hot Tack Sprayer

Model TPS210T This unit is capable of heating a large volume of bitumen on a steady basis. Maximum operating temperature is 200°F.

  • 2" material dispensing valve.
  • Fast material filling through a 4" diameter opening.
  • Fully adjustable, heavy duty, external pressure relief valve.
  • Generous 10 gallon flushing tank for easy clean out.
  • Standard 40 ft. high pressure material hose with 1/4 turn control valve on a 5 ft. spray wand.

Pavement Equipment

Product Description
The Eliminator Zero Clearance Roller™

With this rollers innovative, and patented, front drum design, the operator has the capability of operating very close to vertical obstacles on either side of the machine. Practically eliminates the need for further hand compaction of material against walls or other obstructions that other rollers would normally steer clear from. The operator sits directly over the front drum. This allows for visibility never before offered for the roller operator. All needed machine controls are at his or her finger tips. Hydraulic power steering, proportional hydraulic drive control, emergency/parking brake, and vibration control are all standard features on this machine.

Pavement Surface Prep ▪ Leaf & Debris Removal ▪ Litter Removal

Product Description
Little Wonder Blower

Little Wonder 9131 - 13hp Honda Wheeled Blower Little Wonder blowers are ideal for moving leaves and stubborn debris, removing standing water or preparing asphalt for resurfacing. Little Wonder's 13 HP blower is the biggest in their line. The housings are even larger than the 8 HP and 9 HP blowers, for maximum air output. The 13 HP boast the legendary Honda overhead valve engine, the Leader in its Class.

Billy Goat Blower

Billy Goat The Force™ Wheeled Blower Lightweight, low noise and durable performance are the hallmarks of our all new composite line blowers. The FORCE weighs up to 17 pounds less than comparably powered steel competitors, it remains the quietest wheel blower, and it is tuned to produce unmatched blowing power.

Shindaiwa Backpack Blower

Shindaiwa EB630 - Backpack Blower With a combination of advanced features – from the carburetor to the high-efficiency impeller and blower housing – the EB630 series is setting new standards of blower performance. With a performance rating of 201 mph and 613 CFM, the EB630 is one of the most powerful blowers from Shindaiwa.


Product Description
Grazor / Crack Cleaner

For improved sealer adhesion, use this machine to remove vegetation and other debris from cracks and crevices before sealing them. The grazor's robust construction and balanced platform make cleaning cracks much less of a chore.

Utilizes a steel-bristled brush for scraping crevices clean. Single person operation. Rotating front caster for superior maneuverability along twisting and winding crevices. Automatic clutch safely disengages steel-bristled cleaning wheel.

Billy Goat Grazor

An industrial strength crevice cleaner. Ideal for the removal of debris and weeds from asphalt and concrete cracks.

The Billy Goat Grazor is your answer to vegetation removal from asphalt and concrete cracks. A 4 HP Honda engine powers a solid steel wire bristle brush that quickly cleans the crevice of debris to provide a better edge for asphalt sealing. Six depth adjustments and side swivel give you versatility and worry free operation.

Grinders - Stripe Removers

Product Description
Stripe Removal Technologies 5.5 HP Scarifier

SRT SC8E - 5.5 HP Honda Gasoline Its compact size makes the SC8E easy to handle and transport. Ideal for smaller, tighter, hard to reach areas.

Stripe Removal Technologies 9 HP Scarifier

SRT SC10E - 9 HP Honda Gasoline With its compact dimensions and substantial power source, the SC10E can be used practically anywhere. For all around use, the SC10E is ideal for small spaces, yet powerful enough for larger projects. Available in Gas, Electric and Propane.

Lances & Torches

Product Description
Crafco Hot Air Lance

Hot air lances burn vapor propane and mix it with super heated compressed air to create high velocity air and direct it towards the pavement surface. Cleaning, drying and heating the pavement crack improves the adhesion of the crack sealant. You can fill cracks immediately without worry of burning or charring the pavement surface.

Crafco Cold Air Lance

Use this tool in conjunction with an air compressor to blow cracks and joint clean.

Crafco Hand Torch

Used where heat is needed on the E-Z Pour 50, Patcher I. and II. Machines, includes 6m (20 feet) hose.

Plate Compactors

Product Description
Wacker Vibratory Asphalt Plate Compactor

Wacker Model WP1550AW – Plate Compactor Designed for the compaction of granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs, and abutments.

Stone Forward Plate Compactor

Silver Fox Model SFA3500 – Plate Compactor The SFA3500 Silver Fox forward plate is designed for asphalt applications such as patching and finishing.

MBW Vibratory Plate Compactor

Model AP2000 – Place Compactor This series of vibratory plate compactors are specifically designed for asphalt applications. The mechanical construction of the AP2000 is specific to asphalt applications. Stress relieved steel plate housings are crack-resistant and provide long wear. Aluminum exciter housing dissipates heat rapidly and custom lubricants preserve bearing and seal integrity. Plate edges are replaceable for smooth asphalt finishes throughout the life of the machine.


Product Description
Wacker Four-Cycle Vibratory Rammer

Model BS 50-4S - Rammer These 4-cycle vibratory rammers are designed for the compaction of cohesive, mixed and granular soils in confined areas.

Multiquip 4-Cycle Gasoline Rammer

Our 4-cycle rammers are available with the choice of Honda or Robin engines. The units have lower noise levels, reduced emissions and fuel requirements while increasing performance. No need for mixed fuel.

Multiquip Diesel Rammer

Choose these rugged, powerful rammers for job sites where diesel-fueled machines are preferred. Heavy-duty construction and reliable performance are the real benefits of this series.

Rotary Brooms

Product Description
Bensink Moss Buster Rotary Broom

Throw away your push brooms! Throw away your scrapers! Throw away your propane burners and torches! Bensink Mfg's Moss Buster Rotary Broom is here. When you need to clean along curbs, in tight spaces, nasty crankcase oil spills, and worst of all, moss; let the Moss Buster do the hard part for you.


Product Description
Crafco Pavement Cutter / Router 200

The Crafco Model 200 Pavement Cutter has been the industry standard for twenty-five years. There is no other pavement cutter that can match the quality, reliability, long term performance and features of the Crafco Model 200. It's lightweight mobile design, unique center of axis and cutter head alignment enables it to produce unmatched crack following accuracy. There is no better way to effectively and efficiently create sealant crack reservoirs than with the Crafco Model 200, the most popular pavement cutter throughout the world.

Crafco Crack Saw Attachment Option for Model 200

31350 - Designed to convert PC 200 into a joint and random crack saw for use on concrete and asphalt. Conversion takes less than one hour.

Crafco Steel Cutter for Model 200

31134 - Place in line with six spacers on each side. The cut will be approximately ½ inch (13mm) wide. Use on AC pavement or PCCP. Some spalling can be expected.

Crafco Wide Cut & Carbide Cutters for Model 200

31135 - Wide Cut Cutters 31150 - Extended Life Wide Cut Cutters* These cutters are designed to provide a cut width that can be adjusted from ½ inch (13mm) to 2 inches (51mm). These cutters have no shoulders allowing a more exact cut width. All cutter blades must be evenly placed for proper balance and must have the proper number of spacers to keep cutters snug. Use on AC pavement or PCCP. Some spalling can be expected.

31136 - Carbide Cutters Standard blades with a narrow hub for cutting cracks. It is possible to adjust the width of the cut. Knives should be adjusted with spacers for required configuration. 31149 - Extended Life Carbide Cutters *

Crafco Wide Hub Carbide Cutter for Model 200

31145 - Used for routing standard cracks. The new wide hub cutter produces a cleaner cut, reduces spalling, eliminates wobble, reduces machine vibration, and creates less pin wear. The cleaner pavement cut improves the sealant bond to the crack sidewall resulting in a longer lasting crack seal. New cutters are easier for installation need just one spacer from each side.

Crafco Carbide Cutters for Model 200

31138 - 6 ½" (16,5cm) These cutters are the same as the 31136 cutter except they have an increased cut depth up to 73 mm. Three cutters are evenly spaced on the cutter head leaving every other pin empty.

Crafco Cutter Pins for Model 200

31114 – Cutter Pins CRAFCO cutter pins are specifically manufactured to withstand shock and abrasion associated with this machine. Ultra hard on the outside for wear resistance and flexible on the inside. Use only Crafco pins with Crafco cutters. Failure to do so will void all warranties and is dangerous.

31151 – Extended Life Cutter Pins Use these pins to gain 20% to 30% more life as compared to the 31114 pin and always use with any extended life cutter. Using excessively worn pins will damage the cutter head.

Crafco Diamond Cutter Blade -Concrete for Model 200

10023 - Diamond Cutter Blade on Concrete Usually supplied diamond blade for the crack saw attachment on PC 200. Dimensions: diameter 180 mm; width 9 mm (life cca 500 m, according the concrete).

Scarifiers - Walk-Behind

Product Description
Edco 8" & 10" Walk-Behind Scarifiers

EDCO's push model scarifiers clean, texture, level, groove or remove large or small concrete and asphalt surface.

Ideal for:

  • Sidewalk trip hazard repair
  • Concrete and coatings removal
  • Floor cleaning and/or preparations
  • Creating non-slip surfaces
  • Traffic line and markings removal

Edco 10" & 12" Self-Propelled Scarifiers

Ideal for larger jobs on concrete or asphalt such as parking deck repairs, factory floor preparation or road repairs.

Graco GrindLazer Scarifier Systems Introducing the GrindLazer, the stripe removal machine designed to make your work easier and much less time consuming.

Graco Heavy-Duty Line Driver can be attached to save time and labor!

Product Description
Graco GrindLazer 270

The GrindLazer 270 is the perfect scarifier for removing parking lot lines and smoothing uneven surfaces. It's Easy Glide Wheel Mount System makes it as easy to use as a LineLazer and its rugged, innovative design means you can count on it to perform for a lifetime of use.

Graco GrindLazer 390

Ideal for removing traffic paint, thermoplastic, epoxy coating and smoothing uneven surfaces. The GrindLazer 390 is the contractor's choice for all-around scarifying jobs including parking lot lines, intersection markings, construction zones and sidewalk smoothing. With the optional LineDriver system its productivity is unmatched and means you can get more work done every day without the fatigue from walking.

Graco GrindLazer 480

Ideal for removing traffic paint, thermoplastic, epoxy coating and smoothing uneven surfaces - with extra power for inlay and grooving. GrindLazer 480 is the high production choice when it comes to the most demanding scarifier jobs. With its "Up-Cut" cutting direction you not only are able to remove all types of lines found on parking lots or roadways but now have the power to do inlay/grooving jobs. Combined with the LineDriver you'll finish jobs faster and more accurately than ever before!

Snow Blowers / Throwers

Product Description
Ariens Snow Products – The King of Snow®

Every machine in the Ariens® Sno-Thro® line-up is engineered for durability. The reliable performance in moving snow up and out of the way is unparalleled. Inspiring owner confidence is the fact these machines are backed by an industry-leading 3-year warranty.

  • Wheeled and track styles available in various sizes.
  • Maximum flow efficiency provides higher discharge capacity & increased throwing distance.
  • Larger-diameter impellers eliminate the flow bottleneck that is a reoccurring problem with most other brands.

Stripers & Accessories

Product Description

Graco LineLazer
The preferred choice for parking lot and seal coating contractors looking for professional performance in a one-gun striper.

Need help deciding which striper is right for your line painting needs or striping crew? Just give us a call!

Graco LineLazer 3400 Striper

LineLazer 3400 is the preferred choice with parking lot and seal coating contractors who are looking for professional performance and features, in a one-gun machine.

Graco LineLazer IV 200HS Striper

LineLazer IV 200HS is the solution for medium to large jobs that demand line perfection – every time!

  • Advanced Vibration Reduction System eliminates engine vibration for better line quality.
  • Rear gun mount allows placement of the guns closer to the rear axle for straighter long lines and smoother curved lines.
  • Lightweight gun holder minimizes gun movement caused by rough pavement.
  • New Chromex pump rod is built for the most demanding applications.
  • New flow-through Easy Out filter comes out with the cap for convenient, mess-free access.

Graco Airless Stripers

LineLazer IV 3900 & LineLazer IV 5900 Both the LineLazer IV 3900 and the LineLazer IV 5900 are the clear leaders for 2-gun professional stripers and are designed specifically to deliver the most precise and consistent lines in the industry.

Graco LineLazer IV 3900 Striper Auto-Layout System

LineLazer IV 3900 featuring the exclusive new Auto-Layout System allows you to do layout jobs without the hassle and "pain" – only from Graco.

  • Finish striping jobs faster - 30% faster with walk behind stripers and 50% faster using the LineDriver.
  • Less hassle, less fatigue - no bending to mark the lines and read a tape measure.
  • Pin point accuracy - accurate to 1/4 inch at 100 feet.
  • New Digital Display now shows psi, mph, mils-instant average, lineal foot, gallons and mils-total.
Take the pain out of layout - no more tape measures, calculating errors, guessing, sore backs, wasted energy, or missed opportunities.

Graco LineLazer IV Auto- Layout System

5900AL Striper The LineLazer IV 5900 with Auto-Layout is the new industry standard for parking lot layout jobs.

200HSAL Striper Increased performance along with the exclusive Auto-Layout System makes the LineLazer 200HS the preferred striper for professional contractors who demand unmatched hydraulic power.

Graco LineDriver Ride-On Attachment

Grace LineDriver HD Ride-On Attachment Accessory for the LineLazer IV series of airless line striping equipment. Converts your LineLazer striper machine to a rideable unit which can double production and accuracy while reducing operator fatigue. Great for large jobs, big parking lots and road striping.

Use with:
LineLazer II (3500 & 5000)
LineLazer III & IV (3900, 5900 & 200HS)

Graco FieldLazer Striper

Airless spray delivers higher quality lines with ease.

Key Applications
Field Lines
Hash Marks
Corner Kicks

Amazing Versatility in a User-Friendly Package

  • Stripe long, straight lines
  • Spray stencils or large solid areas
  • Paint circles and arcs
  • Mark corner kicks too!

Graco ThermoLazer Striper

Introducing ThermoLazer, the most user-friendly, innovative thermoplastic striper to hit the streets.

  • Control Flow System - Precise material flow control with a squeeze of a lever.
  • Split Bead System - Split hopper holds over 90 lbs (40 kg) of beads and dispense system allows fast and flexible line width changes without tools.
  • Spring Guard Protection System - Extends spring life plus no-tool removal and installation.
  • Easy Glide System - First thermoplastic line striper with dual rear wheels and Fat Track Front Swivel for smooth LineLazer-like handling.
  • High Cap Hopper System - 20-50% larger for fewer refills. 300 lbs (136 kg) material capacity.
  • Optional Double-Bead Drop System Kit installs in minutes.

Why walk when you can ride! Attach a Graco LineDriver to the ThermoLazer and:

  • Improve production up to 50%
  • Reduce user fatigue
  • Achieve higher line quality
  • Use the industry's first ride-on compatible hand liner

Graco Gun Hose Kits

Graco Gun Hose Kits are offered in a variety of gun and hose configurations to cover every application from fine finishing to heavy-duty textured applications.

  • Every kit includes BlueMax II airless hose that is over 10% lighter weight and has increased hose flexibility.
  • Contractor and Silver Gun Hose Kits include a free whip hose.
  • Fine Finish Gun Hose Kits include everything a contractor needs for fine finish work, all in one convenient package.

Graco Tip Guards

RAC X, RAC 5, RAC Heavy Duty, Flat Tip, Fine Finish Proven quality and maximum performance are designed and built into every tip guard made by Graco.

  • RAC X Handtite Guards - no tools required.
  • RAC 5 Tip Guards - for a variety of applications
  • RAC Heavy-Duty Tip Guards
  • Flat Tip Guards
  • Fine Finish Flat Tip Guards

Additional Products


  • Woven Stabilization Fabric
  • Filtration Fabric
  • Non-Woven Separation Fabric
  • Paving Fabrics & Membranes
  • Erosion Control Fabric
  • Silt Fence Fabric
  • Asphalt Overlay
  • Geogrids
  • Petromat & Mirafi

Site Work Materials & Supplies

  • Silt Fence (pre-wired & contractor / Drainage & Non-Woven DOT grade)
  • Orange Barrier Fence
  • Metal T-Posts
  • Securing Pins & Staples
  • Silt Fence Wire
  • Turbidity Barriers

Erosion Control Materials

  • Straw Wattles
  • Erosion Control Blankets (ECB's)
  • Gabion Baskets & Reno Mattresses
  • Silt Fence
  • Geocells (cellular confinement systems)
  • Sand / Rock Bags (poly & burlap)
  • Turf Reinforcement Mats
  • Plastic Netting
  • Coir Logs & Mats
  • Dust Control
  • Rip Rap Erosion Control Fabric
  • Slope Protection
  • Geogrids (bi-axial & uni-axial)
  • Visqueen
  • Stakes (wood & t-posts)
  • Geonets
  • Polypropylene Mats
  • Pyramat
  • Straw Blankets (single & double net)
  • Biodegradable Filtration System
  • Wire Staples

Stormwater Products

  • Inlet Protectors
  • Curb Drain Protectors
  • BMP Products
  • Treatment Solutions

Prefabricated Drains

  • Foundation Sheet Drains
  • Soil Strip Drains
  • Geonets

Geomembranes, Linings & Covers

  • Pond Liners (PVC, EPDM & HDPE)
  • Silt Curtains


  • Corrugated Metal Culvert
  • PVC & ABS Plastic Culvert
  • Retention /Detention Pipe Systems
  • On-Site Waste Water Chambers
  • Basins, Channels & Grates
  • High Density Polyethylene Pipe

Landscape Products

  • Weed Barriers
  • Ground Cover
  • Frost Blankets
  • Ditch Vegetation Fabric
  • Burlap
  • Fabric Staples
  • Pond Liners (PVC, EPDM & HDPE)

Sediment Control Devices

  • Siltsack®
  • Gutterbuddy®
  • Triangular Silt Dike®
  • SedimentSTOP®
  • De-Watering Bags